|
Product Details:
|
| Name: | X71 Circular Electro Permanent Magnetic Chuck | Type: | Permanent Electromagnetic Clamping |
|---|---|---|---|
| Material: | Steel, Ndfeb Magnet | Size(mm): | 580mm |
| Power: | Electric, Ndfeb Magnetic | Usage: | Lathe, Milling, Drilling, Grinding Machine, Clamping |
| Application: | Industrial Magnet, Grinding Machine, Spark Machine Center, For Clamping Thin Small Work Piece | Color: | Customized, Yellow, Green, Black，red |
| Oem: | Yes, Available | Warranty: | 12 Months, 1 Year |
| High Light: | 580mm Magnetic Lathe Chuck,Circular magnetic lathe chuck,X71 Circular Magnetic Chuck |
||
X71 circular electro permanent magnetic chuck
X71 Circular Electro Permanent Magnetic Chuck
Product Introduction
X71 circular electronic controlled permanent magnetic chuck is designed with “multi-magnetic circuit and electric control”, its magnetism is adjustable. After magnetization, X62 does not need to continue to supply electric power. Electric power is supplied by quick connection or electric slip ring. Two clamps are accessible during the processing, work piece can be machined freely. It can really play the function “one clamping to complete three-sided processing”. X62 is suitable for work piece that not easy to clamp, such as thin wall parts, flange parts, shaped parts, etc. It is widely used on horizontal lathe, vertical lathe, vertical grinder, 5 axis machining center, turning and milling composite machine tool and so on."
Product Parameters
Model |
Dimensions(MM) | Polar Number | Channel Number | Voltage (V) | Max RPM [1/min] |
Net WT (KG) | Overall size (CM) | ||
| φD | φd | H | |||||||
| X71-400 | 400 | 60 | 100 | 12 | 1 | 220/480 | 1000 | 98 | 50*50*20 |
| X71-500 | 500 | 60 | 100 | 12 | 1 | 220/480 | 800 | 150 | 60*60*20 |
| X71-600 | 600 | 80 | 100 | 12 | 1 | 220/480 | 650 | 220 | 70*70*20 |
| X71-700 | 700 | 80 | 110 | 12/16 | 2 | 220/480 | 600 | 290 | 80*80*22 |
| X71-800 | 800 | 120 | 110 | 12/16 | 2 | 220/480 | 500 | 390 | 90*90*22 |
| X71-1000 | 1000 | 200 | 120 | 16/24 | 2 | 220/480 | 400 | 660 | 110*110*22 |
| X71-1200 | 1200 | 250 | 120 | 16/24 | 2 | 220/480 | 320 | 950 | 130*130*22 |
| X71-1400 | 1400 | 300 | 130 | 18/24 | 4 | 220/480 | 260 | 1400 | 150*150*25 |
| X71-1600 | 1600 | 400 | 130 | 24/32 | 4 | 220/480 | 240 | 1850 | 170*170*25 |
| X71-1800 | 1800 | 500 | 130 | 24/32 | 4 | 220/480 | 160 | 2300 | 190*190*25 |
| X71-2000 | 2000 | 600 | 135 | 24/36 | 6 | 220/480 | 128 | 2900 | 210*210*26 |
| X71-2500 | 2500 | 800 | 135 | 36/48 | 8 | 220/480 | 100 | 4500 | 268*268*26 |
| X71-3000 | 3000 | 800 | 140 | 36/48 | 8 | 220/480 | 80 | 6800 | 318*318*26 |
| X71-3500 | 3500 | 1000 | 140 | 48/60 | 10 | 220/480 | 60 | 9500 | 368*368*26 |
| Note: Other specifications can be customized ,please call for further information. Suggestion: You can choose two installation methods (Quick plug/electric conductive slip ring). |
|||||||||
| Permanent Magnetic Chuck | Electromagnetic Magnetic Chuck | Electro Permanent Magnetic Chuck | |
| Magnetic Source | Ndfeb | Coil and Core | Ndfeb Anico |
| Magnetic Force Principle | Internal Magnetic Fields | Constant Current | Conversion by Electronic Control Device |
| Usage | Manual | Electric Control Device | Electric Control Device |
| Precision | About 0.02-0 05 (the Error Increased Bysizes) | About 0.01-0.02 | About 0 002-0.005 |
| Potential Risk | Prone to Security Incidents | Prone to Security Incidents | Absolute Safety |
| Magnetic Regulation | Unable to Adjust | Electric Control Device to Adjustsuction | Electric Control Device to Adjust Suction |
| Suction | Small | Medium | Large |
| Residual Magnetism | More Remanence, Demagnetiz Ation Devicerequired | Less Remanence, Demagnetizationdevice Required | Automatic Demagnetiz Ation Withoutdemagnetization Device |
| Thermal Deformation | No | Continuous Power On, Heat Generationand Thermal Deformation | No |
| Applicable Workpiece | Thin and Small Workpieces | Thin and Small, Medium Sizedworkpieces | All Kinds of Workpieces |
| Application | Mainly Used for Grinding Machine | Mainly Used for Grinding Machine | For Grinding/milling/lathe Manchine and Soon. |
| Accessories | No | Electric Control Device | Electric Control Device |
| Serive Life | 3-5 Years | 6-10 Years | 20 Years |
Product Accessories
Magnetic Blocks
Use Magnetic Blocks to Machines 6 Sides of the Workpiece at Same Time. Blanks and Irregular
Workpieces Could Be Adjusted to Adapt to Their Roughness by Sliding Up and Down the Elastic Blocks, Toprovide Larger Magnetic Force.
More processing schemes can be provided by using different magnetic
guide blocks pardigm as below
PULSE CONTROLLER
Product introduction:
safety protection: The spindle linkage can be realized by unlocking the input contact signal and themagnetized output contact. lt is equipped with adjustable magnetoelectric current (or short circuit)protection and undercurrent (or circuit break) alarm functions.
Simple operation: all setting parameters and running state can be monitored through the host panel, andthe power frequency can be automatically tracked;Flexible configuration, easy to use.
control interface: it is equipped with a variety of alternative control interfaces, which can satisfy allkinds of on-line control requirements. It also has alternative control (remote) or PLC interfaces.
Install and Use
INSTRALL
Fixed In Clamp Slot
Secure With Screw Holes
MAGNETIZATION STEPS
1. Plug in
2. Press the
magnetization button
3. Until the green light isalways on
4. Unplug the plug andciose the cover
DEMAGNETIZATION STEPS
1. Plug in
2. Press the demagnetization button
3. Until the red light isalways on
4. Unplug the plug andclose the cover
Application Scenario
Why Choose Us?
Safety, Magnetism Continue 30years Without Electric. Energy saving, Above 95%.
The Clamping Force Can Be As nigh As More Than 20 Kg/cm2.
High Efficiency, Improve The efficiency of More Than 60%.
Very Easy to Use, Fast, Durable, Maintenance Free.
MAGNETIC CLAMPING VS TRADITIONAL CLAMPING
| Suitable for clamping of various workpieces without deformation | Clamping tends to deform the workpiece |
| Uniform suction, improve processing accurcy | During the machining process, the workpiece generates vibrations, which reduces the machining accuracy and the surface flatness. |
| Accurate positioning, convenient clamping | Difficult clamping and inaccurate positioning reduce work efficiency |
| No interference position, workpieces can be f machined on five sides at one time | clamping with processing interference positions, workpieces can not be processed in one operation |
Processing Technology
1. Cnc Flame Cutting
2. Gantry Milling
3. Cnc Processing Centor
6. Coils and Magnetic Steel Assembly
5. Deburring and Cleaning
4. Drilling Machine
7. Magnetic Steel Commissioning
8. Electrical with Stand Voltage Detection
9. Epoxy Potting
10. Suction and Pull-out Force Test
11. Surface Grinder Finish Machining
12. Surface Magnetic Remanence (inspection)
13. Finished Product Electrical with Stand Voltage Detection
14. Finished Product Appearance Inspection
15. Packing List Inspection
16. Finished Package
Company Profile
As a professional designer and manufacturer ofmagnetic products over 10 years, JYC technology Co., Ltd. is always providing customers appro-priate solutions to holding and lifting materialduring machining progressing.
The huge range of our magnetic products includeElectro magnetic chuck(EMC) series, Permanentmagnetic chuck(PMC) series, Electro permanentmagnetic chuck(EPMC) series, Electro magneticlifter (EML),.Permanent magnetic lifter(PM-L),Electro permanent magnetic lifter (EPML),Iron remover, Demagnetizer, etc.
Magnet is widely used in industries like metallurgy, machinery, shipbuilding, electric power, mine, automobile manufacturing, rail transportation and so on.
There is mainly 3 kinds of magnet, permanent magnet, electromagnet, permanent electromagnet. different magnet is suitable for different areas, and as a professional supplier of magnetic tools, JYC technology is is always providing customers appropriate solutions for our customers.
FAQ
Q: Are you manufactory or trade company.
Contact Person: Peter
Tel: +8618651006178
